Features & specifications
inset® II Infusion Set
Insulin pump compatibility
Animas®, OneTouch®, Deltec Cozmo®, Accu-Chek®, or Medtronic MiniMed Paradigm®
(a special reservoir is required for use with the MiniMed Paradigm® series)
Insertion angle
90 degrees (straight)
Insertion
One-handed insertion
Insertion device incorporated in the product
Hidden introducer needle
Needle protection after use
Disconnection feature
One-handed disconnection at the site
Reversible connector
Standard Luer-lock
Yes
Cannula material and length
Soft
6 mm and 9 mm
Fill volume
0.3 units for 6 mm cannula
0.5 units for 9 mm cannula
Colours
Blue, Grey, and Pink
Tubing length
60 cm (23”) and 110 cm (43”)
Cannula / needle gauge
0.68 mm soft cannula
27 gauge introducer needle
inset® 30 Infusion Set
Insulin pump compatibility
Animas®, OneTouch®, Deltec Cozmo®, Accu-Chek®, or Medtronic MiniMed Paradigm®
(a special reservoir is required for use with the MiniMed Paradigm® series)
Insertion angle
Pre-fixed 30 degrees (angled)
Insertion
One-handed insertion
Incorporated in the product
Hidden introducer needle
Needle protection after use
Disconnection feature
One-handed disconnection at the site
Reversible connector
Quiet release
Placement and insertion for both inset II and inset 30 can be done one-handed. When removing the introducer needle, inset 30 requires holding the set in place with the other hand.
Standard Luer-lock
Yes
Cannula material and length
Soft
13 mm
Fill volume
0.7 units
Colours
Blue, Grey, and Pink
Tubing length
60 cm (23”) and 110 cm (43”)
Cannula / needle gauge
0.68 mm soft cannula
27 gauge introducer needle
Comfort® and Comfort® Short Infusion Sets
Insulin pump compatibility
Animas®, OneTouch®, Deltec Cozmo®, Accu-Chek®, or Medtronic Minimed Paradigm® (a special reservoir is required for use with the Minimed Paradigm® series)
Insertion angle
Adjustable from 20 – 45 degrees (angled)
Insertion
Manual. No option for insertion device.
Disconnection feature
One-handed disconnection at the site
Standard Luer-lock
Yes
Cannula material and length
Soft
13 mm (Comfort Short)
17 mm (Comfort)
Tubing length
60 cm and 110 cm (23” and 43”)
Cannula /needle gauge
0.68 mm soft cannula
27 gauge introducer needle
Contact® Detach Infusion Set
Insulin pump compatibility
Animas®, OneTouch®, Deltec Cozmo®, Accu-Chek®, or Medtronic Minimed Paradigm®
(a special reservoir is required for use with the Minimed Paradigm® series)
Insertion angle
90 degrees (straight)
Insertion
One-handed straight insertion, no insertion device
Infusor needle is part of tubing by pre-attached adhesive
Disconnection feature
Disconnection at separate adhesive site – 13 centimeters (5”) from the needle site
Standard Luer-lock
Yes
Tubing length
60 cm and 110 cm (23” and 43”)
Needle length and material
Stainless steel
6 mm
8 mm
Needle gauge
29 gauge
